Foam Cladding Installation

View of master bedroom corner window with sunhoods

First coat of render and meshing applied.

Close up view of master bedroom top sunhood awing above master bedroom door.

The second coat of render is being applied over mesh.
You can see the edge PVC beading fixed to edges of bottom sunhood. All corners have PVC beading to insure straight edges and to protect from chipping.

Southern side of the building ready for final Rockcote render finish.

The sunhood over garage sliding door is being prepared for installation.

The garage sliding door is ready for the sunhood installation.
The vertical panel has already been installed.

The steel plate with 19mm rods welded to it has been screw fixed to the frame.

The sunhood panel with 19mm holes cut into it with laser is slid over the rods. The holes have glue squeezed into them prior to the panel being pushed into the rods.

Sunhood panel in place ready for the adjoining panel fitted.
The next step is to glue fix the PVC edge beading and then apply render and meshing.